Tricyclic mill works:
the main micro-grinding spindle motor driven by gear and layers turntable rotation , wheel studs driven by dozens ring roller mill ring raceway scroll and rotate . Bulk material through the crusher into small particles by elevator into the storage hopper , electromagnetic vibrating feeder evenly to the material on the turntable in the middle , to the circle surrounding bulk material under the action of centrifugal force, and falls and a grinding mill raceway ring is a ring roller stamping, roll grinding , grinding, materials are crushed and then fall into the first layer of the second layer and the third layer , high pressure centrifugal blower suction outside air sucked into the machine , and after the third layer of coarse crushed powder with selected within . Cochlear inner separator flow generated by the rotation of the worm so coarse material down regrinding , powder into the air into the cyclone powder collector by the lower part of the discharge valve discharge is finished , and with a small amount of fine dust after the pulse flow is discharged through the fan and filter purification muffler .
Features:
1, low investment costs. In the same fineness, the investment is less than the jet mill, low cost, short payback period.
2, the powder is high. Under the same fineness and power consumption than jet mill and agitation mill high yield over 45%.
3, the vulnerability of low loss. All wearing parts are made of high quality domestic and wear-resistant materials, consumables than ordinary mill equipment long life, and can be in more than one year.
4, safe and reliable operation of the grinding chamber. The ultra-fine grinding mill, compared with ordinary grinding chamber without rolling, no screws, bearings and other seals so there is no problem wearing, avoiding screw loosening and destruction of the machine problems.
5, finished fineness. Disposable final fineness can reach 5μm.
Model |
HGM80 |
HGM90 |
HGM100 |
HGM100A |
HGM125 |
mm(Ring Diameter) |
800 |
900 |
1035 |
1300 |
Ring Number/ pcs |
3 |
3-4 |
3 |
4 |
4 |
Roller Number/ pcs |
21 |
24~32 |
27 |
34~36 |
40~44 |
Main Shaft Speed /r. p. min |
230~240 |
200~220 |
180~200 |
135~155 |
Input Size/mm |
≤ 20 |
Finished Size/μ m |
5-47(325~2500) |
Capacity t/h |
0.5-4.5 |
0.6-6.5 |
0.7-7 |
1-8.5 |
1.5-12 |
Outlet Size LXWXH/m |
13.9*4*6.2 |
14.7*4.8*7.2 |
18*4.6*8.6 |
14*9*10.25 |
Power /Kw |
145-165 |
185-204 |
263 |
263-290 |
380-430 |