Product description:
Gold Centrifugal Concentrator is based on the law of centrifugal force and it has been developed and improved on the traditional centrifugewhich could save much energy .Alleviated the suction effect, heavy grains get full settlement in the mineral which greatly improve theequipment Specific ability of selection and recovery rate that can up to more than 90%
Advantages:
The recovery rate increase the Sn:3.01%,W:5.5%,Pb:1.63%,Zn:2.04;water consumption reduced by 30% - 40%, working operationarea reduced by 1/3, the strokecan be adjusted by electromagnetic adjustable speed motor so that can achieve impulse stepless speedregulation . Its performance reaches the domestic advanced level, and is one of the ideal energy saving re concentration equipment atpresent.
Working Principle:
Gold Centrifugal Concentrator is composed by the pipe, track, tailing tank.drive motor,vertical axis and mineral processing componentswith other components .The ore-forming parts are divided into inner and outer layers.the inner layer is a conical cone made of stainlesssteel and has many small holes with the a ring grid . the outer layer made of ordinary steel form a closed water jacket with the inner
The transmission shaft is a hollow, the pressure water is transported to the closed jacket though the hollow shaft. The water jet is continuouslyinjected from the inner hole to form the reverse flushing water, and the reverse flushing pressure position is arranged in the sortingprocess. 0.03-0.06MPa
The mineral particles after grinding and sieving will be feed to the pipe through upper center in slurry form . The miner in the feedingdressing part is effected by the centrifugal force of high-speed rotation will upward along the cone.The light minerals From the upperperiphery of the cone is discharged into the tailings tank and then exhaust from the outlet of tailings. The heavy minerals is deposited
between bars Under the influence of centrifugal force, actually deposit on the inner cone
| Technical parameters of centrifugal machine: |
| Equipment model |
STL 20 |
STL 30 |
STL 60 |
STL 80 |
STL 100 |
| Productive capacity(T/h) |
0.2-1 |
'2-8 |
10-40 |
35-70 |
75-120 |
| Feed grain(mm) |
0-3 |
0-4 |
0-6 |
0-6 |
0-6 |
| Feed concentration(%) |
0-50% |
0-50% |
0-50% |
0-50% |
0-50% |
| Recoil water(T/h) |
1.5-2 |
,4-6 |
,10-15 |
17-25 |
40-60 |
| Concentrate production(kg/time) |
,2-3 |
,10-20 |
30-40 |
60-70 |
70-80 |
| The motor power(kw) |
0.75 |
1.5 |
4 |
11 |
18.5 |
| Cone rotational speed |
800 |
600 |
460 |
400 |
360 |
| The pressure of waterMpa |
0.04 |
0.12 |
0.25 |
0.35 |
0.4 |
| Overall dimensions(mm) |
790*785*790 |
1180*1140*1250 |
1970*1670*1750 |
2300*1800*2200 |
2500*2000*2400 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}