YGM High Pressure Mill is mainly applied in metallurgy, building materials, chemicals, mining minerals such as grinding materials processing, can be grinding quartz, feldspar, calcite, talc, barite, fluorite, rare earths, marble, ceramic, aluminum bauxite, manganese ore, iron ore, copper ore, phosphate rock, red iron oxide, zircon sand, slag, slag, cement clinker, activated carbon, dolomite, granite, garnet, iron oxide yellow, bean cake, chemical fertilizer, compound fertilizer, fly ash, bituminous coal, coke, lignite, Ling U. S. Sand, chromium oxide green, gold, red mud, clay, kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, wheat Rice rhyolite stone, pyrophyllite, shale, purple stone, muddy green rock, display cases, Diego rock, basalt stone, gypsum, graphite, silicon carbide, thermal insulation, materials in the 9.3 Mohs hardness below 6% moisture in a variety of non-explosive mineral materials processing.
Features:
1. Compared with other mills under the same power output increased 20-30%, YGM High Pressure Mill grinding roller pressure on the material under the action of the spring in the high-pressure increase 800 - 1200kg.
2. YGM High Pressure Mill on the Mohs hardness of less than 9.3 processing of mineral materials can be crushed.
3. YGM High Pressure Mill wide range of product particle size, particle size up to 0.613 mm the thickest (30 mesh) particle size of generally up to 0.033 mm (425 mesh), few materials can reach 0.013 mm the smallest (1, 000 head).
4. YGM High Pressure Mill dust effect is entirely up to the national dust discharge standard.
5. YGM High Pressure Mill analyzer easy to adjust.
6. YGM High Pressure Mill grinding device of overlapping multi-stage seal, seal.
Working Principle
Firstly, raw material is crushed by jaw crusher to the size required, and then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder, evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind.
After this, the ground stuff is carried by the air from the blower into the separator for screening. The fine powers are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The set's airflow system is closely sealed up and circulated under condition of negative and positive pressure.
| Spec. |
Rollernu
mber |
RollerSize
(MM) |
MaxFeedsize
(MM) |
Finishedsize
(MM) |
WhenThe
yield(T) |
Electric
power(KW) |
Electricpower
(KW)fan |
Dimensions
(MM) |
| YGM7815 |
3 |
260*150 |
15-20 |
0.613-0.033 |
0.8-2 |
18.5 |
15 |
4300*3500*5100 |
| YGM8314 |
3 |
270*140 |
15-20 |
0.613-0.033 |
1-3 |
22 |
22 |
5300*4100*5200 |
| YGM9517 |
4 |
310*170 |
15-25 |
0.613-0.033 |
2.1-5.6 |
37 |
37 |
7100*5900*7900 |
| YGM4121 |
5 |
410*210 |
15-25 |
0.613-0.033 |
2.8-10.5 |
75 |
75 |
7850*8000*9700 |
| MTM160 |
6 |
440*270 |
20-35 |
0.613-0.033 |
5-20 |
132 |
132 |
12550*5700*8350 |
| MTM175 |
5 |
520*280 |
25-40 |
0.6-0.045 |
13-25 |
160 |
200 |
12575*9555*9916 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}