High Efficency Cone Stone Crusher

• Model NO.: CS, HPand PYB Series
• Inlet Size: 40-350mm
• Condition: New
• Color: as Clients Require
• Size of Unit: Small, Midium, Large, Xl
• Installation: Free Initial Installation at Home and Abroad
• After Sales Service: Maintenance and Replacement Service for One Year
• Mining Object: Petroleum Drilling and Production Equipment
• Transport Package: Standard Container, Negotiable
• Specification: International
• Trademark: Dingbo Machinery
• Origin: Shanghai China
• HS Code: 8474209000
• Production Capacity: 20 Sets Per Month

Product Description

Briefly describe cone crusher
Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness, and cone crusher is of stable structure, high efficiency, easy adjustment, and use economically, etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses diluted oil and water as two kinds of sealed formation to make plaster powder and engine oil separated . The type of crushing chamber depends upon the size of feeding and fineness of the crushed product. The standard type(PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Feature Of Cone Crusher: 
1. High quality and productivity.
2. Less machine stop time.
3. Easy maintenance and low cost.
4. Unique crushing ability in primary, secondary and tertiary crushing.

Working Principle of Cone crusher:
Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are drived by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is drived by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the diacharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequantly the output size is determined.

Model	Cavity  Size (Coarse/Fine)	Discharging OpeningS ize(mm)	MaxFeeding Size(mm)	Capacity (t/h)	Power(kw)	External  dimension(mm)	Weigh(t)
CSC-75	C	13-38	175	59-163	75	2656×1636×2241	15
CSB-75	B	9-22	102	45-91
CSD-75	D	3-13	41	27-90
CSC-1160	C	13-38	160	70-215	110-132	2290×1530×2036	23.8
CSB-1160	B	10-25	115	55-135
CSD-1160	D	6-9	80	47-90
CSC-130	C	13-38	180	105-220	132	2630×1760×2212
CSB-130	B	10-25	130	72-170
CSD-130	D	10-19	90	70-125
CSC-160	C	16-51	200	135-350	160	2860×2070×2623	26.8
CSB-160	B	13-25	150	105-180
CSD-160	D	10-19	102	80-140
CSC-240	C	22-64	267	330-725	250	3580×2860×3680	49.5
CSB-240	B	16-25	203	240-330
CSD-240	D	10-19	140	190-330
CSC-360	C	25-76	303	608-99	360	5110×4270×4350	83
CSB-360	B	31-89	334	789-1270
CSD-360	D	10-19	150	352-617